Page 1
1 pc. 14 pcs. (+1 extra) 16 pcs. (+4 extra) 4 pcs. (+1 extra) 1 pc. Cartons 88 5412 941/94Q1, 942 are also needed for assembly. Tool(s) required for assembly: Phillips screwdriver, Level Home Styles Customer Service: www.homestyles-furniture.com, servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319...
Page 2
Assembly Instructions 2/8 IMPORTANT Use a soft cloth between these parts and the floor. Do not use power tools above 8 volts to assemble. Do not tighten all the bolts until each part is properly assembled. The unit must be level to work properly.
Page 3
Assembly Instructions 3/8 STEP 3 Attach Back Stretcher (I) and Front Stretcher (K) to Side Panel (B) with Cam Locks. Attach unit from Step 2 to unit with Cam Lock and Head Cap Bolts. (See Figure 4) Head Cap Bolt Figure 4 Cam Lock STEP 4...
Page 4
Assembly Instructions 4/8 Wood Screw (middle) STEP 6 Attach Leaf Top (A2) to Top (A1) with Wood Screw (middle). (See Figure 5) Cam Lock Figure 5 STEP 7 Turn the unit from Step 5 to its’ upright position. Level the unit by adjusting the adjustable levelers on the bottom of legs.
Page 5
Assembly Instructions 5/8 Top extension instructions STEP 1 Lift up the Leaf Top. STEP 2 Holding the Leaf Top, pull out a back leg from the unit; then pull out the other back leg. Note: Unit must be level for the back legs to pull out.
Page 6
Assembly Instructions 6/8 Drawer (O) STEP 1 Attach Drawer Front (O1) and Drawer Back (O2) to Drawer Side (O3) with Wood Screws (long). Attach Drawer Side (O4) to unit with Wood Screws (long). Roller at back STEP 2 Slide Drawer Bottom (O5) into the grooves of Drawer Sides (O3) and (O4) until it meets Drawer Front (O1).
Page 7
Assembly Instructions 7/8 Drawer (P) STEP 1 Attach Drawer Front (P1) and Drawer Back (O2) to Drawer Side (O3) with Wood Screws (long). Attach Drawer Side (O4) to unit with Wood Screws (long). Roller at back STEP 2 Slide Drawer Bottom (O5) into the grooves of Drawer Sides (O3) and (O4) until it meets Drawer Front (P1).
Page 8
Assembly Instructions 8/8 Drawer (Q) STEP 1 Attach Drawer Front (Q1) and Drawer Back (O2) to Drawer Side (O3) with Wood Screws (long). Attach Drawer Side (O4) to unit with Wood Screws (long). Roller at back STEP 2 Slide Drawer Bottom (O5) into the grooves of Drawer Sides (O3) and (O4) until it meets Drawer Front (Q1).
Page 9
Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at: www.homestyles-furniture.com/customer-service/replacement-parts Home Styles Customer Service: www.homestyles-furniture.com, servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319...
Need help?
Do you have a question about the 88 5412 943 and is the answer not in the manual?
Questions and answers