Advertisement
Assembly Instructions Page 3
7a
7a: Secure right and left hinged base of Seat Assembly
7
using 2-M6x40mm bolts with spacers
7b: Follow this diagram for correct placement of center spacers on right and left sides.
8
Loosely screw each adjustment knob
8
Then slide 1 Locking Slide Bracket Assembly over each Arm
Rest
in the positioning shown above. Slide each assembly
past the holes at the bottoms of each Arm Rest
tighten each Adjustment Knob
10
Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO 80120
Customer Service Department 1-866-972-6168
(as shown above).
into each slide bracket
and firmly
.
17' Single Vantage Deluxe Ladder Stand
7b
LEFT
spacer
located
here
to Left Backrest Support
9
With each Slide Bracket
9
facing outward and forward (as shown above), attach
the front of each right and left Armrest assembly
the front most screw hole of each right and left Handle
Rail assembly
10
Attach Shooting Rail
Rail Arms
using 2-M6x25mm bolts
Model: PVLS-316
RIGHT
spacer
located
here
and Right Backrest Support
and Adjustment Knob
using 2-M6x45mm bolts
to right/left Shooting
.
to
.
©2020 (rev. 1/20)
Advertisement
