Advertisement
Quick Links
17' Single Vantage
Deluxe Ladder Stand
MODEL: PVLS-316
• Always Wear a Safety Harness with this Product
• Practice Using at Ground Level
• Weight Limit: 300 lbs.
• Tree Size: 9"-18" diameter
Thank you very
much for choosing
We appreciate
your business!
W A R N I N G
Every year serious injury or death can occur from hunting related accidents. To ensure your safety, please completely read and follow this safety manual
and all warning labels before assembling, installing or utilizing this product.
Do not use this product before fully understanding all safety warnings and instructions. If you have questions, are unsure about any information or need additional
information concerning your product, contact our customer service department at 1-866-972-6168 or visit www.Primaltreestands.Com. Keep and
maintain this safety and instruction manual in a safe location for future reference.
Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO 80120
Instruction and Safety Manual
SAFETY MUST BE YOUR FIRST PRIORITY WITH THIS PRODUCT
©2020 (rev. 1/20)
Advertisement
Related Manuals for PRIMAL TREESTANDS PVLS-316
Summary of Contents for PRIMAL TREESTANDS PVLS-316
- Page 1 Instruction and Safety Manual 17’ Single Vantage Deluxe Ladder Stand MODEL: PVLS-316 • Always Wear a Safety Harness with this Product • Practice Using at Ground Level • Weight Limit: 300 lbs. • Tree Size: 9”-18” diameter Thank you very...
- Page 2 Treestand Safety Warnings Please read the following instruction manual and warnings labels completely before utilizing this product. Failure to understand and execute the instructions and warnings may result in serious injury or death. In the event of an accident, have a plan for rescue, including the use of devices that may be easily reached while suspended.
- Page 3 Treestand Safety Warnings NEVER adjust your stand while in use. Practice the attachment of this treestand at ground level before using in a hunting environment. ALWAYS ensure that you and your treestand are safely secured to a healthy tree. Your tree stand MUST be attached tightly to the tree and secured in place. If the stand is not secure, it may shift while in use, resulting in serious injury or death.
-
Page 4: Proper Care And Maintenance
Choosing A Safe Tree • ALWAYS thoroughly inspect the tree before installing your product. DO NOT install your TREE/LADDER STAND onto any dead or unsafe tree, telephone or utility pole, structural column, or man-made structure. Doing so may result in serious injury or death. •... -
Page 5: Parts List
17’ Single Vantage Deluxe Ladder Stand MODEL: PVLS-316 • Always Wear a Safety Harness with this Product • Weight Limit: 300 lbs. • Practice Using at Ground Level • Tree Size: 9”-18” dia. PARTS LIST Top Ladder Middle Ladder Bottom Ladder... - Page 6 17’ Single Vantage Deluxe Ladder Stand MODEL: PVLS-316 • Always Wear a Safety Harness with this Product • Weight Limit: 300 lbs. • Practice Using at Ground Level • Tree Size: 9”-18” dia. HARDWARE BOX P/N 316H Slide Brackets (2)
- Page 7 Model: PVLS-316 Assembly Instructions Page 1 17’ Single Vantage Deluxe Ladder Stand ALL PHOTOS TAKEN FROM FRONT VIEW UNLESS OTHERWISE NOTED Remove all contents from packaging and make sure all parts are present before attempting to assemble. Tighten all bolt connections by hand first and then when fully assembled, go back and tighten with a wrench.
- Page 8 Model: PVLS-316 Assembly Instructions Page 2 17’ Single Vantage Deluxe Ladder Stand 5a: With the Handle Rail / Tree Brace / Ladder Jaw assembly in the same position from Step 3, secure Right and Left Backrest Supports through right and left Handle...
- Page 9 Model: PVLS-316 Assembly Instructions Page 3 17’ Single Vantage Deluxe Ladder Stand LEFT RIGHT spacer spacer located located here here 7a: Secure right and left hinged base of Seat Assembly to Left Backrest Support and Right Backrest Support using 2-M6x40mm bolts with spacers (as shown above).
- Page 10 Model: PVLS-316 Assembly Instructions Page 4 17’ Single Vantage Deluxe Ladder Stand 11a: Position the Shooting Rail assembly (Step 10) so that it rests on top of the right/left Slide Brackets and Adjustment Knobs (shown above), secure right/left Shooting Rail Arms...
- Page 11 Model: PVLS-316 Assembly Instructions Page 5 17’ Single Vantage Deluxe Ladder Stand BOTTOM Carefully tilt ladder stand assembly forward so that the bottom is facing forward and the rear is facing upward. With Horizontal Jaw Assembly Strap passed through the top loop of Vertical Jaw Assembly Strap...
- Page 12 Model: PVLS-316 Ladder Assembly Instructions 17’ Single Vantage Deluxe Ladder Stand Slide the top of Middle Ladder Slide the top of Bottom Ladder Section into the bottom of Top Section into the bottom of Ladder Section . Lining all Middle Ladder Section .
- Page 13 Model: PVLS-316 Installation Strap Instructions 17’ Single Vantage Deluxe Ladder Stand Insert end of strap through the loop. Pull to tighten. Continue with these Place looped end of strap steps to install the other strap on under platform. the other strap on the other side of the platform.
- Page 14 Model: PVLS-316 Ratchet Strap Instructions 17’ Single Vantage Deluxe Ladder Stand Insert Ratchet through loop. Place looped end of Ratchet under platform. Pull to tighten. Pull to tighten. Insert strap through loop. Place looped end of strap under platform. YOU MUST READ AND FOLLOW ALL INSTRUCTIONS PRIOR TO INSTALLATION ©2020 (rev.
- Page 15 Model: PVLS-316 Truss Assembly Instructions 17’ Single Vantage Deluxe Ladder Stand Carefully lay fully assembled Ladder Stand front ladder side down so that the tree attachment side is facing upward. Attach the hooked side of Truss Cable without the tension adjuster to the...
- Page 16 Model: PVLS-316 Truss Configuration Instructions 17’ Single Vantage Deluxe Ladder Stand CORRECT TRUSS IS TOO LOOSE TRUSS IS TOO TIGHT Do not over-torque truss system. If ladder is bowed too far, it will If ladder is perfectly straight or force users to climb at an bowed toward tree, TRUSS IS This is correct.
-
Page 17: Installation Instructions
Model: PVLS-316 Installation Instructions Page 1 17’ Single Vantage Deluxe Ladder Stand Position bottom of stand 4-5 feet from base of tree NOTE: Make sure that Ladder Jaws One person will stand at the base of ladder with in their open most position. - Page 18 Model: PVLS-316 Installation Instructions Page 2 17’ Single Vantage Deluxe Ladder Stand NOTE: The Ladder Jaws are designed to wrap around a tree trunk when Vertical Jaw Assembly Strap is tightened. Before engaging the Ladder Jaw Mechanism: 1) Check that the Ladder stand is properly installed on correct sized tree.
- Page 19 MODEL: PVLS-316 Model: PVLS-316 Installation Instructions Page 3 SINGLE VANTAGE 17’ DELUXE LADDERSTAND 17’ Single Vantage Deluxe Ladder Stand After the ladder stand has been secured to the tree with: 1) The installation straps secured. 2) The truss cable correctly tensioned 3) The Ladder Jaw system fully connected/engaged.
- Page 20 W A R N I N G Failure to follow all warnings listed below could result in serious injury or death. ALWAYS read and understand all warnings and instructions DO NOT use this tree stand while under the influence of NEVER leave the ground without checking every ladder before each use of this product.