Advertisement
Assembly Instructions Page 2
4
Couple together Left Backrest Support
4
Support
and attach to the rear of Foot Platform
2-M8x50mm bolts
Backrest supports should bend AWAY from foot platform
(as shown above).
5b
Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO 80120
Customer Service Department 1-866-972-6168
and Right Backrest
NOTE: The top of Left and Right
17' Single Vantage Deluxe Ladder Stand
5a
5a: With the Handle Rail / Tree Brace / Ladder Jaw assembly
in the same position from Step 3, secure Right and Left
Backrest Supports
Rails
and Tree Brace
Rail tubes
5
NOTE: Check to make sure that Tree Brace
secured (as shown above).
5b: Attach Foot Platform
Section
NOTE: Center washer should go in between Foot Platform
and Foot Rest
using
6
6
Slide right and left sleeves of Seat Assembly
Back Support
of the seat pad on top of right and left Handle Rails
Model: PVLS-316
and
through right and left Handle
(already slid inside of Handle
) using 2-M8x60mm bolts
and Foot Rest
using 2-M8x70mm bolts with 3 washers
on both sides.
and Right Back Support
.
is correctly
to Top Ladder
over Left
. Rest the base
.
©2020 (rev. 1/20)
Advertisement
