Advertisement
Quick Links
Standz-Up Ladder Stand Aid
MODEL: PVHA-100
• Designed for two person use
• Works with most ladder stands
W A R N I N G
Every year serious injury or death can occur from hunting related accidents. To ensure your safety, please completely read and follow this safety manual
and all warning labels before assembling, installing or utilizing this product.
Do not use this product before fully understanding all safety warnings and instructions. If you have questions, are unsure about any information or need additional
information concerning your product, contact our customer service department at 1-866-972-6168 or visit www.Primaltreestands.Com. Keep and
maintain this safety and instruction manual in a safe location for future reference.
Distributed by Acheson Harriman Swan, LLC, 2407 W. Euclid Ave., Littleton, CO 80120
Instruction and Safety Manual
SAFETY MUST BE YOUR FIRST PRIORITY WITH THIS PRODUCT
Thank you
very much
for choosing
We appreciate
your business!
©2021 (rev. 1/21)
©2021 (rev. 1/21)
Advertisement
Related Manuals for PRIMAL TREESTANDS PVHA-100
Summary of Contents for PRIMAL TREESTANDS PVHA-100
- Page 1 Instruction and Safety Manual Standz-Up Ladder Stand Aid Thank you very much MODEL: PVHA-100 for choosing • Designed for two person use • Works with most ladder stands We appreciate your business! W A R N I N G SAFETY MUST BE YOUR FIRST PRIORITY WITH THIS PRODUCT Every year serious injury or death can occur from hunting related accidents.
- Page 2 Choosing A Safe Tree • ALWAYS thoroughly inspect the tree before installing your product. DO NOT install your TREE/LADDER STAND onto any dead or unsafe tree, telephone or utility pole, structural column, or man-made structure. Doing so may result in serious injury or death. •...
-
Page 3: Parts List
Standz-Up Ladder Stand Aid MODEL: PVHA-100 • Designed for two person use • Works with most ladder stands PARTS LIST 1 Top Stabilizer Bar.......Part # PISB-100R 1 Middle Stabilizer Bar....Part # POSB-100R 1 Stabilizer Base......Part # PSB-100R 1 Center Ladder Bracket....Part # PCAB-100R 1 L. - Page 4 Model: PVHA-100 Assembly Instructions Page 1 Standz-Up Ladder Stand Aid Ladder Ladder Support Support Bracket Bracket facing up facing up Lay Middle Stabilizer Bar on the ground with the Attach the Stablizer Base onto the bottom of the Middle brackets facing up. Slide the Center Ladder Bracket...
- Page 5 Model: PVHA-100 Assembly Instructions Page 2 Standz-Up Ladder Stand Aid Ratchet Strap Bracket should face away from the tree. Fit the 2-M8 Quickclips onto each Left and right Ladder Support brockets .NOTE: These Quickclips will be used to secure the base of the ladder stand into place during hoisting procedures.
- Page 6 Model: PVHA-100 Installation Instructions Standz-Up Ladder Stand Aid Follow your ladder stand manufacturer instructions in locating an appropriate tree. Find as level ground as possible. Lean the Standz Up Ladder Aid against the tree with the Ladder Support Brackets facing OUTWARDS away from the tree.
-
Page 7: Use Instructions
Model: PVHA-100 USE INSTRUCTIONS Standz-Up Ladder Stand Aid NOTE This product requires at least two (2) people for safe and correct lifting. Lay out your ladder stand so that the bottom rungs are parrallel to the Standz Up Ladder Aid base. Adjust the Left and Right Ladder Support Brackets to match the correct width of your ladder stand.