Transport; Storage; Disposal - Dräger PSS BG 4 RP Instructions For Use Manual

Table of Contents

Advertisement

Available languages

Available languages

en

Transport

10. Install switch box.
11. Fit the compressed oxygen cylinder (see chapter 3.3.2 on
page 51).
5
Transport
Ensure that the closed-circuit breathing apparatus is
transported in an upright position so that the condensate in the
breathing hoses can gather in the drain valve and breathing
bag.
6

Storage

When the closed-circuit breathing apparatus is stored with
fitted CO
absorber, the breathing circuit must be closed. The
2
compressed oxygen cylinder does nove to be installed. The
expiry date of the CO
absorber must not be exceeded during
2
the next use.
Store the closed-circuit breathing apparatus ready for use in a
dark, cool, dry, dirt-free and dust-free place. Avoid exposure to
UV rays and ozone. The closed-circuit breathing apparatus
should be stored upright as far as possible.
7

Disposal

This closed-circuit breathing apparatus must not be
disposed of as municipal waste. This is indicated by
the adjacent icon.
You can return this product to Dräger free of charge.
For information please contact the national sales or-
ganisations and Dräger.
Batteries and rechargeable batteries must not be
disposed of as municipal waste. This is indicated by
the adjacent icon. Collect and dispose of batteries and
rechargeable batteries at battery collection centres,
in accordance with applicable regulations.
Dräger accepts returned single-use CO
for a charge. A decision on its subsequent use will be made
when the product is returned. For information please contact
the national sales organisations and Dräger.
Alternatively, the CO
absorber can be disposed of as follows:
2
CAUTION
!
Risk of chemical burns!
The chemicals in the CO
humidity in the atmosphere or water to form a caustic
base. The base causes severe eye damage and skin
irritation, it can also irritate the respiratory system.
Use protective goggles and base-resistant gloves
when working with the CO
1. Pack the CO
absorber in a bag and seal air-tight.
2
2. Dispose of the CO
absorber in accordance with the rele-
2
vant regulations.
70
absorber cartridges
2
absorber react with the
2
absorber.
2

Advertisement

Table of Contents
loading

Table of Contents