Advertisement
EBA1240 eZ.HD Series
1080p FHD IP66 IR Dome Camera
User's Manual
Copyright © EverFocus Electronics Corp.
Release Date: May, 2019
All the images including product pictures or screen shots in this document are for example
only. The images may vary depending on the product and software version. Information
contained in this document is subject to change without notice.
EverFocus Taiwan:
2F., No.12, Ln. 270, Sec. 3, Beishen Rd., Shenkeng Dist., New Taipei City 222, Taiwan
TEL: +886 2 2662 2338 FAX: +886 2 2662 3632 www.everfocus.com.tw
Advertisement
Table of Contents
Related Manuals for EverFocus EBA1240 eZ.HD Series
Summary of Contents for EverFocus EBA1240 eZ.HD Series
- Page 1 The images may vary depending on the product and software version. Information contained in this document is subject to change without notice. EverFocus Taiwan: 2F., No.12, Ln. 270, Sec. 3, Beishen Rd., Shenkeng Dist., New Taipei City 222, Taiwan TEL: +886 2 2662 2338 FAX: +886 2 2662 3632 www.everfocus.com.tw...
- Page 2 1. Introduction EverFocus eZ.HD series cameras – EBA1240 deliver 1080p full HD image quality. The model provides 3.6mm fixed lens with ICR. Featured with Digital Wide Dynamic Range (D-WDR), the camera can provide clear images even under backlight circumstances where intensity of illumination can vary excessively.
- Page 3 1.3 Dimensions 94.5mm / 3.72" 1.4 Optional Accessory BA-E310 Color / Material: White / Metal Size (Φ x H): 101 x 52mm / 3.98”x2” Weight: 540g / 1.2lb BA-E173 Color / Material: White / Metal Size (W x D x H): 173 x 111 x 114mm / 6.81”x4.37”x4.49”...
- Page 4 2. Installation 1. Stick the supplied Mounting Sticker to the surface to mark the 4 screw positions. Drill four holes on the surface and insert the supplied 4 Screw Anchors into the screw holes. If you want to run the cable through the surface, drill a hole within the 4 screw area.
- Page 5 b. If you want to wire the cables through the surface: Attach and screw the Camera Base to the surface with the supplied 4 Screws, and then attach the Camera Body to the Camera Base. Camera Base Wall Camera Body 4.
- Page 6 Switching Video Format: Push the joystick up for 5 sec. to switch to • AHD. Push the joystick right for 5 sec. to switch • to TVI. Push the joystick down for 5 sec. to switch • to CVI. Push the joystick left for 5 sec. to switch to •...
- Page 7 3. Configuration in the OSD Menu No Main Sub Menu Sub Menu / Function Brightness 0-100 Global Exposure Center Mode Return Gray World Mode R Gain 0-63 B Gain 0-63 Return Gain Day/Night Low/Middle/High Auto Gain Night/Day Low/Middle/High Mode Day/Night Color Return Contrast...
- Page 8 Color Red/Green/Blue Transparency On/Off Return Return Version Reset 10 Save & Exit 11 Exit...
Need help?
Do you have a question about the EBA1240 eZ.HD Series and is the answer not in the manual?
Questions and answers