Table of Contents
Advertisement
To Change Password
1.
Choose the Set Password option from the CMOS Setup Utility main menu and
press <Enter>.
2.
When you see "Enter Password", enter the existing password and press
<Enter>.
3.
You will see "Confirm Password". Type it again, and press <Enter>.
4.
Select Set Password again, and at the "Enter Password" prompt, enter the new
password and press <Enter>.
5.
At the "Confirm Password" prompt, retype the new password, and press
<Enter>.
6.
Select Save to CMOS and EXIT, type <Y>, then <Enter>.
To Disable Password
1.
Choose the Set Password option from the CMOS Setup Utility main menu and
press <Enter>.
2.
When you see "Enter Password", enter the existing password and press
<Enter>.
3.
You will see "Confirm Password". Type it again, and press <Enter>.
4.
Select Set Password again, and at the"Enter Password" prompt, please don't
enter anything; just press <Enter>.
5.
At the "Confirm Password" prompt, again, don't type in anything; just press
<Enter>.
6.
Select Save to CMOS and EXIT, type <Y>, then <Enter>.
3.2.12
Save & Exit Setup
Note!
Typing "Y" will quit the BIOS Setup Utility and save user setup value to
CMOS.
Typing "N" will return to BIOS Setup Utility.
PCM-9588 User Manual
34
Advertisement
Table of Contents
