Mounting The R&S Esr In A Rack; Connecting The Ac Power - R&S ESR Getting Started

®
R&S ESR
5.6 Mounting the R&S ESR in a Rack
To prepare the rack
1. Observe the requirements and instructions in
on page 6.
2. NOTICE! Insufficient airflow can cause overheating and damage the product.
Design and implement an efficient ventilation concept for the rack.
To mount the R&S ESR in a rack
1. Use an adapter kit to prepare the R&S ESR for rack mounting.
a) Order the rack adapter kit designed for the R&S ESR. For the order num-
ber, see the data sheet.
b) Mount the adapter kit. Follow the assembly instructions provided with the
adapter kit.
2. Lift the R&S ESR to shelf height.
3. Grab the handles and push the R&S ESR onto the shelf until the rack brack-
ets fit closely to the rack.
4. Tighten all screws in the rack brackets with a tightening torque of 1.2 Nm to
secure the R&S ESR in the rack.
To unmount the R&S ESR from a rack
1. Loosen the screws at the rack brackets.
2. Remove the R&S ESR from the rack.
3. If placing the R&S ESR on a bench top again, unmount the adapter kit from
the R&S ESR. Follow the instructions provided with the adapter kit.
5.7

Connecting the AC Power

The R&S ESR is equipped with an AC power supply connector.
Getting Started 1316.3749.02 ─ 09
Preparing For Use

Connecting the AC Power

"Setting up the product"
32