Connecting A Keyboard; Connecting An External Monitor - R&S ESR Getting Started

®
R&S ESR
5.11

Connecting a Keyboard

The keyboard is detected automatically when it is connected. The default input
language is English – US.
To configure the keyboard language
1. To access the Windows operating system, press the Windows key on the
external keyboard.
2. Select "Start > Settings > Time & language > Region & language > Add a lan-
guage" .
5.12

Connecting an External Monitor

You can connect an external monitor to the "MONITOR" connector on the instru-
ment's rear panel.
For details on the connector refer to
1. Connect the external monitor to the R&S ESR.
2. Press the [SETUP] key.
3. Press the "General Setup" softkey.
4. Press the "More" softkey.
5. Press the "Configure Monitor" softkey.
The configuration of the connected monitor is determined and displayed in the
standard Windows configuration dialog box.
6. In the configuration dialog box, you can switch from the internal monitor (lap-
top icon) to the external monitor (monitor icon), or both (double monitor icon).
If the external monitor is selected, the R&S ESR display is disabled. The
screen content (measurement screen) formerly displayed on the R&S ESR is
displayed on the external screen. If you select both monitors, the R&S ESR
screen and the external screen are both active.
Getting Started 1316.3749.02 ─ 09

Connecting an External Monitor

Chapter 4.2.3, "VGA
Preparing For Use
Interface", on page 25.
37