Table of Contents
Advertisement
5.8. Schedule interface
The schedule interface is accessible only for operator level or maintenance level, as shown in Figure 22. The
schedule interface can help the user to set various timing ON-OFF actions, as shown below.
There are two options on the upper left of the schedule home page - the schedule setting and the holiday setting.
Click corresponding option, and then you can enter corresponding setting page.
Schedule Settings
The schedule setting refers to set ON-OFF time within selected date (that is, from Monday to Sunday. It shall be 8
kinds of date in total by adding the holiday). For each date, it allows you to set up to 4 ON-OFF timing.
The method for adding one ON-OFF timing is as follows: click
select it; and then there will be state selection and time setting box on its right side, it can switch ON-OFF timing by
clicking the
in the status box; and the hour and the minute of the time can be set by clicking the up or down key in
time setting box; and finally click OK to confirm the setting value.
Cooke Industries - Phone: +64 9 579 2185
Operation description for HMI 7-inch touch screen
Figure 21. Digital input box
Figure 22. Schedule Interface
Email: sales@cookeindustries.co.nz
and one default item can be added; click the item to
64
Web: www.cookeindustries.co.nz
Advertisement
Table of Contents
