Table of Contents
Advertisement
5.4. Module status interface
Under module status interface, the right display area will display various information related to the module. In
order to display the information of the corresponding module, the user firstly needs to select the corresponding module
number through the "Unit Selection" menu, and the module number selected by default is the Unit 1. The detailed menu
items under module status are shown in the following table.
Module status
Cooke Industries - Phone: +64 9 579 2185
Operation description for HMI 7-inch touch screen
Figure1.1. Module status Interface
Module sequence selection
Module networking status
Module fault status
Software version of module board A
Software name of module board A
Chilled backwater temperature of AI1 module
Chilled outflow-water temperature of AI2 module
Cooling backwater temperature of AI3 module
Cooling outflow-water temperature of AI4 module
1-1# compressor's exhaust gas temperature
1-2# compressor's exhaust gas temperature
2-1# compressor's exhaust gas temperature
2-2# compressor's exhaust gas temperature
AI13 1 # suction temperature
AI14 2 # suction temperature
AI16 loading status
AI17 de-loading status
AI18 1# suction saturation temperature
AI19 2# suction saturation temperature
AI20 1 # suction pressure
AI21 2 # suction pressure
AI22 1 # exhaust pressure
AI23 2 # exhaust pressure
AI24 1#exhaust gas saturation temperature
AI25 2#exhaust gas saturation temperature
Email: sales@cookeindustries.co.nz
54
Web: www.cookeindustries.co.nz
Advertisement
Table of Contents
