Advertisement
Quick Links
Owner's Guide and Installation Manual
4CO28XX Series Fan
UL Model No. : 4CO28
Attach sales receipt to this card and retain as your proof of purchase
RETAILER NAME:
DATE OF PURCHASE:
MODEL NUMBER:
To register your fixture, please visit our website www.montecarlofans.com
4.9 kgs
10.78 lbs
Total fan weight
Advertisement
Related Manuals for Monte Carlo Fan Company 4CO28 Series
Summary of Contents for Monte Carlo Fan Company 4CO28 Series
- Page 1 Owner’s Guide and Installation Manual 4CO28XX Series Fan UL Model No. : 4CO28 Attach sales receipt to this card and retain as your proof of purchase RETAILER NAME: DATE OF PURCHASE: MODEL NUMBER: To register your fixture, please visit our website www.montecarlofans.com 4.9 kgs 10.78 lbs Total fan weight...
- Page 2 All set screws must be checked and tightened where necessary before installation. Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety Glasses, Stepladder and Wire Strippers. Customer Service 800-969-3347 Customer Service Center 7400 Linder Ave. Skokie, IL 60077 www.montecarlofans.com © 2013 Monte Carlo Fan Company 6/15/2013...
- Page 3 Ball. This must be done to prevent the fan body from through the bracket. Cable in the U.S., Do Not Remove Knockouts In rotating when the blades are in motion. The Outlet Box. © 2013 Monte Carlo Fan Company 6/15/2013...
- Page 4 Pass leadwires and safety cable Place canopy over fan body align- Remove side covers from canopy ex- ing holes. posing 4 holes. 2 closed holes and 2 through the canopy. open “L” shape holes. © 2013 Monte Carlo Fan Company 6/15/2013...
- Page 5 Tighten in position. Install the screws that were not screws securely. Repeat this process 3 more installed from earlier step. Tighten securely. times until all blades are assembled. © 2013 Monte Carlo Fan Company 6/15/2013...
- Page 6 Install switch cap to fan using the 3 screws provided. Tighten securely. © 2013 Monte Carlo Fan Company 6/15/2013...
-
Page 7: Troubleshooting
2.Check for loose or disconnected wires in fan switch housing. 3.Check for loose or disconnected wires in light kit. 4.Check for faulty light bulbs. CAUTION: Make sure main power is turned off before entering switch housing. © 2013 Monte Carlo Fan Company 6/15/2013... - Page 8 Feb.2012 New format Jun.2013 Update for CUL regulation...