Advertisement
Quick Links
Owner's Guide and Installation Manual
Attach sales receipt to this card and retain as your proof of purchase
DATE OF PURCHASE:
MODEL NUMBER:
To register your fixture, please visit our website www.montecarlofans.com
4BFR54XXD Series Fan
UL Model NO. : 4BFR54(X) (For damp location fan)
RETAILER NAME:
RETAILER ADDRESS:
9.7 kgs
21.34 lbs
Total fan weight with light
Advertisement
Related Manuals for Monte Carlo Fan Company 4BFR54
Summary of Contents for Monte Carlo Fan Company 4BFR54
- Page 1 Owner’s Guide and Installation Manual 4BFR54XXD Series Fan UL Model NO. : 4BFR54(X) (For damp location fan) Attach sales receipt to this card and retain as your proof of purchase DATE OF PURCHASE: RETAILER NAME: RETAILER ADDRESS: MODEL NUMBER: To register your fixture, please visit our website www.montecarlofans.com 9.7 kgs...
-
Page 2: Cautions And Warnings
Note: Suitable for use in damp locations. Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety Glasses, Stepladder and Wire Strippers Customer Service 800-969-3347 Customer Service Center 7400 Linder Ave. Skokie, IL 60077 www.montecarlofans.com © 2014 Monte Carlo Fan Company 1/5/2014... - Page 3 Place yoke cover on top housing of fan. Warning: Cross pin must be installed securely, failure to install it will result in serious injury. © 2014 Monte Carlo Fan Company 1/5/2014...
- Page 4 AC N. Black from house to Black from remote marked AC L. Connect all green grounded wires to Grounded wire from House. Make sure that no filaments are outside of the wire connectors. Insert the remote receiver into mounting bracket. © 2014 Monte Carlo Fan Company 1/5/2014...
- Page 5 Reset the lights by turning off the wall switch, breaker,or by remote. Replace bulbs with the correct wattage bulbs, turn the power on. © 2014 Monte Carlo Fan Company 1/5/2014...
- Page 6 Place remote machine screws provided. screws provided. Snap battery cover in over 2 pins on front cover. Attach cover place of remote by placing over 4 pins and snapping into place. © 2014 Monte Carlo Fan Company 1/5/2014...
- Page 7 “light dimmer”. The light will cycle from bright to dim to bright until button is released. Light will maintain last setting if turned off. Note: If not using for long periods of time, remove battery to prevent damage to remote transmitter, and store the remote transmitter away from excess heat or humidity © 2014 Monte Carlo Fan Company 1/5/2014...
-
Page 8: Troubleshooting
WARNING: Over lamping the fan will result in the fan lights shutting down until the proper wattage of bulbs are installed. Reset the lights by turning off, replace bulbs with the correct wattage bulbs, Turn power on. © 2014 Monte Carlo Fan Company 1/5/2014... - Page 9 Jan.2014 Apr.12.14, Change light lead wires from fan to be black and white from blue and white...