Safety Information; Safety Instructions - Interchange SBCS5016 Operator's Manual

16 Ga. Wide Crown Staplers
Drives Wide Crown Staples (5/8" to 2" / 16 to 50mm)

Safety Information

!
1.
OpERATORS AND OTHERS IN WORK AREA MUST WEAR SAFETY GLASSES
WITH SIDE SHIELDS.
equipment by the tool operator and other personnel in the work area .
2.
EAR AND HEAD pROTECTION MAY BE NEEDED IN SOME
ENVIRONMENTS.
Some work areas may include exposure to high noise levels which can
lead to hearing damage . Always wear ear protection to protect your
ears from loud noise . Wear head protection to protect your head from
flying objects .
3.
KEEp FACE, HANDS AND FEET AWAY FROM FIRING HEAD AT
ALL TIMES.
Never place your face, hands or feet near the firing head .
4.
KEEp FINGER AWAY FROM TRIGGER WHEN NOT DRIVING FASTENERS TO
AVOID ACCIDENTAL FIRING.
Always carry the stapler by the handle only . Never carry the stapler with your finger on
trigger since you could drive a fastener unintentionally and injure yourself or someone
else .
5.
NEVER pOINT STApLER AT YOURSELF OR OTHERS IN WORK AREA.
Respect the stapler as a working implement . Always assume the stapler contains
fasteners and never point the stapler at yourself or others, whether or not it contains
fasteners . If fasteners are mistakenly driven, it can lead to severe injuries . Never
engage in horseplay with the stapler .
6.
DRESS pROpERLY.
Do not wear loose clothing or jewelry as they can be caught in moving parts . Rubber
gloves and nonskid footwear are recommended when working outdoors . Wear
protective hair covering to contain long hair .
7.
KEEp VISITORS AWAY.
All visitors should be kept safely away from work area and should not handle the
stapler .
8.
KEEp OUT OF REACH OF CHILDREN.
9.
DO NOT OVERREACH.
Keep proper footing and balance at all times .
6
Interchange Brands
Important Safety Instructions for
Operating Staplers
READ ALL INSTRUCTIONS
Danger to the eyes exists due to the possibility of flying fasteners and
debris when operating the stapler . To guard against these hazards
always wear safety glasses with side shields to protect both the front
and sides . Make sure others in the work area wear safety glasses, too .
Eye protection equipment must conform to the requirements of
American National Standards Institute, ANSI Z87 .1 .
The employer is responsible to enforce the use of eye protection
Model No. SGSW5016 Item No. 64415
Model No. SBCS5016 Item No. 64419
Operator's Manual