Interchange SN5016 Operator's Manual

Interchange SN5016 Operator's Manual

Medium crown stapler, drives 16 gauge, 7/16 crown staples (1" to 2" / 25 to 51mm)

Advertisement

Operator's Manual
Medium Crown Stapler
Model No. SN5016
Item No. 64405
Drives 16 Gauge, 7/16" Crown Staples
(1" to 2" / 25 to 51mm)
Ask for
Genuine
INTERCHANGE
®
N Staples
NOTE:
Please read and fully understand the instructions in this
manual before operating the pneumatic power tool. Carefully read
through this OPERATOR'S MANUAL to ensure efficient, safe operation. It is
recommended that the MANUAL be kept readily available as an important refer-
ence when using this tool.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SN5016 and is the answer not in the manual?

Questions and answers

Summary of Contents for Interchange SN5016

  • Page 1 Operator’s Manual Medium Crown Stapler Model No. SN5016 Item No. 64405 Drives 16 Gauge, 7/16" Crown Staples (1" to 2" / 25 to 51mm) Ask for Genuine INTERCHANGE ® N Staples NOTE: Please read and fully understand the instructions in this manual before operating the pneumatic power tool.
  • Page 2: Table Of Contents

    16 Ga. Medium Crown Stapler Model No. SN5016 Item No. 64405 Drives 7/16" Crown Staples (1" to 2" / 25 to 51mm) Index Information . . . . . . . . . . . . . . . . . . . . . . . . . . . Page Important Information .
  • Page 3: Important Information

    16 Ga. Medium Crown Stapler Model No. SN5016 Item No. 64405 Drives 7/16" Crown Staples (1" to 2" / 25 to 51mm) Important Information WARNING: The warnings, cautions and instructions discussed in this instruction manual can not cover all possible conditions and situations that may occur .
  • Page 4: Tool Information

    FASTENERS: 16 ga . ( .063" x . 055" / 1 .6mm x 1 .4mm), 1" to 2" / 25 to 51mm, 7/16" / 11 .1mm Medium Crown Staples WARNING: Be sure to use only the genuine staples recommended for the SN5016 . The use of any other staples can result in tool malfunction and/or staple breakdown, leading to serious injuries .
  • Page 5: Parts Identification

    16 Ga. Medium Crown Stapler Model No. SN5016 Item No. 64405 Drives 7/16" Crown Staples (1" to 2" / 25 to 51mm) Parts Identification Accessories STANDARD ACCESSORIES Eye Protection ① Interchange Brands Operator’s Manual...
  • Page 6: Safety Information

    16 Ga. Medium Crown Stapler Model No. SN5016 Item No. 64405 Drives 7/16" Crown Staples (1" to 2" / 25 to 51mm) Safety Information Important Safety Instructions for Operating Staplers READ ALL INSTRUCTIONS OPERATORS AND OTHERS IN WORK AREA MUST WEAR SAFETY GLASSES WITH SIDE SHIELDS.
  • Page 7 16 Ga. Medium Crown Stapler Model No. SN5016 Item No. 64405 Drives 7/16" Crown Staples (1" to 2" / 25 to 51mm) 10 . STAY ALERT. Watch what you are doing . Use common sense and do not operate the stapler when you are tired .
  • Page 8 16 Ga. Medium Crown Stapler Model No. SN5016 Item No. 64405 Drives 7/16" Crown Staples (1" to 2" / 25 to 51mm) 20 . KEEP ALL SCREWS AND COVERS MOUNTED TIGHTLY IN PLACE. Keep all screws and covers tightly mounted . Check their condition periodically .
  • Page 9: Employer's Responsibilities

    16 Ga. Medium Crown Stapler Model No. SN5016 Item No. 64405 Drives 7/16" Crown Staples (1" to 2" / 25 to 51mm) 29 . DISCONNECT AIR HOSE FROM STAPLER WHEN: „ Doing maintenance and inspection „ Loading fasteners „ Clearing a jam „...
  • Page 10: Operating The Stapler

    16 Ga. Medium Crown Stapler Model No. SN5016 Item No. 64405 Drives 7/16" Crown Staples (1" to 2" / 25 to 51mm) Operating the Stapler NOTE: The information contained in this Manual is designed to assist you in the safe operation of the stapler .
  • Page 11: Lubrication

    „ Filter-regulator-lubricator units should always be used . Keep the lubricator filled with INTERCHANGE pneumatic tool lubricant . „ If a lubricator is not available, supply 3 to 5 drops of INTERCHANGE pneumatic tool lubricant into the air plug on the tool twice a day .
  • Page 12: Methods Of Operation

    16 Ga. Medium Crown Stapler Model No. SN5016 Item No. 64405 Drives 7/16" Crown Staples (1" to 2" / 25 to 51mm) Operating The Stapler DANGER: Operators and others in work area must wear safety glasses with side shields . Eye protection equipment must conform to the requirements of American National Standards Institute, ANSI Z87 .1 .
  • Page 13: Staple Loading

    16 Ga. Medium Crown Stapler Model No. SN5016 Item No. 64405 Drives 7/16" Crown Staples (1" to 2" / 25 to 51mm) Staple Loading When loading staples into Stapler Pull the staple feeder backward . The, detach it from the groove ■...
  • Page 14: Testing The Stapler

    16 Ga. Medium Crown Stapler Model No. SN5016 Item No. 64405 Drives 7/16" Crown Staples (1" to 2" / 25 to 51mm) Testing The Stapler Before using the stapler, test it by using the check list below . Conduct the test in the following order .
  • Page 15: Adjusting The Stapling Depth

    16 Ga. Medium Crown Stapler Model No. SN5016 Item No. 64405 Drives 7/16" Crown Staples (1" to 2" / 25 to 51mm) Adjusting the Stapling Depth Driving Depth Adjustment Dial (on some models) WARNING: Always disconnect air supply before changing the adjustment dial .
  • Page 16: Maintenance And Inspection

    16 Ga. Medium Crown Stapler Model No. SN5016 Item No. 64405 Drives 7/16" Crown Staples (1" to 2" / 25 to 51mm) Maintenance and Inspection Read the section titled SAFETY. NOTE: The information contained in this Manual is designed to assist you in the safe maintenance of the stapler .
  • Page 17: Parts Drawing/Schematics, Parts List, Parts Kits

    16 Ga. Medium Crown Stapler Model No. SN5016 Item No. 64405 Drives 7/16" Crown Staples (1" to 2" / 25 to 51mm) Parts Drawing/Schematics, Parts List & Parts Kits PARTS DRAWING/SCHEMATICS FOR SN5016 Interchange Brands Operator’s Manual...
  • Page 18: Parts List

    16 Ga. Medium Crown Stapler Model No. SN5016 Item No. 64405 Drives 7/16" Crown Staples (1" to 2" / 25 to 51mm) PARTS LIST FOR SN5016 ORDER NO. DESCRIPTION ORDER NO. DESCRIPTION 610560 BOLT M6X20 (Loctite 243) 50 321960 BRACKET...
  • Page 19: Parts Kits

    (also fits CN565-15) 98495 SN5016K2 Kit #2 Piston/Driver Assembly/Bumper Kit for SN5016 98500 SN5016K3 Kit #3 Head Cap Assembly for SN5016 Kit (also fits CN565-15) 98505 SN5016K4 Kit #4 Trigger Valve Assembly Kit with Trigger for SN5016 98510 SN5016K5 Kit #5...
  • Page 20: Warranty

    This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. SN5016 16 ga. Stapler Interchange Brands SN5016 Made In China Operator’s Manual (10/8/14)

Table of Contents