1. Manuals
  2. Brands
  3. Interchange Manuals
  4. Power Tool
  5. CN565-15
  6. Operator's manual

Interchange CN565-15 Operator's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

NOTE:
Please read and fully understand the instructions in this
manual before operating the pneumatic power tool. Carefully read
through this OPERATOR'S MANUAL to ensure efficient, safe operation. It is
recommended that the MANUAL be kept readily available as an important refer-
ence when using this tool.
Operator's Manual
15
Model No. CN565-15
Drives Plastic Sheet
1¼" to 2½" / 32 to 65mm
or Wire Weld Collated Nails
1¾" to 2½" / 45 to 65mm
INTERCHANGE
HWCF Wire or
MPC Plastic Sheet Nails
o
Coil Nailer
Item No. 65555
Ask for
Genuine
®

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CN565-15 and is the answer not in the manual?

Questions and answers

Related Manuals for Interchange CN565-15

Summary of Contents for Interchange CN565-15

  • Page 1 Operator’s Manual Coil Nailer Model No. CN565-15 Item No. 65555 Drives Plastic Sheet 1¼" to 2½" / 32 to 65mm or Wire Weld Collated Nails 1¾" to 2½" / 45 to 65mm Ask for Genuine INTERCHANGE ® HWCF Wire or...

  • Page 2: Table Of Contents

    Coil Nailer Model No. CN565-15 Drives Plastic Sheet Nails (1¼" to 2½" / 32 to 65mm) Item No. 65555 or Wire Weld Nails (1¾" to 2½" / 45 to 65mm) Index Information . . . . . . . . . . . . . . . . . . . . . . . . . . . Page Important Information .

  • Page 3: Important Information

    Coil Nailer Model No. CN565-15 Drives Plastic Sheet Nails (1¼" to 2½" / 32 to 65mm) Item No. 65555 or Wire Weld Nails (1¾" to 2½" / 45 to 65mm) Important Information WARNING: The warnings, cautions and instructions discussed in this instruction manual can not cover all possible conditions and situations that may occur .

  • Page 4: Tool Information

    Nail Specifications WARNING: Be sure to use only the genuine nails recommended for the CN565-15 . The use of any other nails can result in tool malfunction, leading to serious injuries . Only the nail sizes shown in the table below can be driven with this nailer .

  • Page 5: Parts Identification

    Coil Nailer Model No. CN565-15 Drives Plastic Sheet Nails (1¼" to 2½" / 32 to 65mm) Item No. 65555 or Wire Weld Nails (1¾" to 2½" / 45 to 65mm) Parts Identification ➑ ➐ ➏ ➊ ➋ Casting ➋ Cylinder Cap ➌...

  • Page 6: Safety Information

    Coil Nailer Model No. CN565-15 Drives Plastic Sheet Nails (1¼" to 2½" / 32 to 65mm) Item No. 65555 or Wire Weld Nails (1¾" to 2½" / 45 to 65mm) Safety Information Important Safety Instructions for Operating Nailers READ ALL INSTRUCTIONS OPERATORS AND OTHERS IN WORK AREA MUST WEAR SAFETY GLASSES WITH SIDE SHIELDS.
  • Page 7 Coil Nailer Model No. CN565-15 Drives Plastic Sheet Nails (1¼" to 2½" / 32 to 65mm) Item No. 65555 or Wire Weld Nails (1¾" to 2½" / 45 to 65mm) 10 . STAY ALERT. Watch what you are doing . Use common sense and do not operate the nailer when you are tired .
  • Page 8 Coil Nailer Model No. CN565-15 Drives Plastic Sheet Nails (1¼" to 2½" / 32 to 65mm) Item No. 65555 or Wire Weld Nails (1¾" to 2½" / 45 to 65mm) 22 . KEEP ALL SCREWS AND COVERS MOUNTED TIGHTLY IN PLACE.

  • Page 9: Employer's Responsibilities

    Coil Nailer Model No. CN565-15 Drives Plastic Sheet Nails (1¼" to 2½" / 32 to 65mm) Item No. 65555 or Wire Weld Nails (1¾" to 2½" / 45 to 65mm) 32 . DISCONNECT THE AIR SUPPLY AND EMPTY THE MAGAZINE WHEN THE NAILER IS NOT IN USE.

  • Page 10: Operating The Nailer

    Coil Nailer Model No. CN565-15 Drives Plastic Sheet Nails (1¼" to 2½" / 32 to 65mm) Item No. 65555 or Wire Weld Nails (1¾" to 2½" / 45 to 65mm) Operating the Nailer NOTE: The information contained in this Manual is designed to assist you in the safe operation of the nailer .

  • Page 11: Lubrication

    „ Filter-regulator-lubricator units should always be used . Keep the lubricator filled with INTERCHANGE pneumatic tool lubricant . „ If a lubricator is not available, supply 3 to 5 drops of INTERCHANGE pneumatic tool lubricant into the air plug on the tool twice a day .

  • Page 12: Operating Instructions

    Coil Nailer Model No. CN565-15 Drives Plastic Sheet Nails (1¼" to 2½" / 32 to 65mm) Item No. 65555 or Wire Weld Nails (1¾" to 2½" / 45 to 65mm) Operating The Nailer DANGER: Operators and others in work area must wear safety glasses with side shields that conform to ANSI Z87 .1 specifications .

  • Page 13: Nail Loading

    Coil Nailer Model No. CN565-15 Drives Plastic Sheet Nails (1¼" to 2½" / 32 to 65mm) Item No. 65555 or Wire Weld Nails (1¾" to 2½" / 45 to 65mm) Nail Loading OPEN THE MAGAZINE Hold door and door latch and pull up door latch .

  • Page 14: Testing The Nailer

    Coil Nailer Model No. CN565-15 Drives Plastic Sheet Nails (1¼" to 2½" / 32 to 65mm) Item No. 65555 or Wire Weld Nails (1¾" to 2½" / 45 to 65mm) Testing The Nailer Before using the nailer, test it by using the check list below .

  • Page 15: Troubleshooting

    Coil Nailer Model No. CN565-15 Drives Plastic Sheet Nails (1¼" to 2½" / 32 to 65mm) Item No. 65555 or Wire Weld Nails (1¾" to 2½" / 45 to 65mm) Driving Depth Adjustment Dial (on some models) WARNING: Always disconnect air supply before changing the adjustment dial .

  • Page 16: Maintenance And Inspection

    Coil Nailer Model No. CN565-15 Drives Plastic Sheet Nails (1¼" to 2½" / 32 to 65mm) Item No. 65555 or Wire Weld Nails (1¾" to 2½" / 45 to 65mm) Maintenance and Inspection Read the section titled SAFETY. SERVICE AND REPAIRS All quality tools will eventually require servicing or replacement of parts due to wear from normal use .

  • Page 17: Parts Drawing/Schematics

    Drives Plastic Sheet Nails (1¼" to 2½" / 32 to 65mm) Item No. 65555 or Wire Weld Nails (1¾" to 2½" / 45 to 65mm) Parts Drawing/Schematics, Parts List & Parts Kits PARTS DRAWING/SCHEMATICS FOR CN565-15 Interchange Brands Operator’s Manual...

  • Page 18: Parts List

    Model No. CN565-15 Drives Plastic Sheet Nails (1¼" to 2½" / 32 to 65mm) Item No. 65555 or Wire Weld Nails (1¾" to 2½" / 45 to 65mm) PARTS LIST FOR CN565-15 NO. ORDER NO. DESCRIPTION NO. ORDER NO. DESCRIPTION 610560...

  • Page 19: Parts Kits

    O-Ring/Gasket/Bumper for CN565-15 (also fits SN5016) 98525 CN565K2 Kit #2 Piston/Driver Assembly/Bumper for CN565-15 98530 CN565K3 Kit #3 Head Cap Assembly for CN565-15 (also fits SN5016) 98535 CN565K4 Kit #4 Trigger Valve Assembly with Trigger for CN565-15 98540 CN565K5 Kit #5...

  • Page 20: Warranty

    This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. CN565-15 Coil Nailer Interchange Brands CN565-15 Made In China Operator’s Manual (10/8/14)

Table of Contents

Save PDF