Table of Contents
Advertisement
Chapter 8. Hardware replacement procedures
This section provides installation and removal procedures for all serviceable system components. Each
component replacement procedure references any tasks that need to be performed to gain access to the
component being replaced.
The ThinkAgile HX2320 Appliance and HX2321 Certified Node appliances are based on the ThinkSystem
SR630 server. For hardware replacement procedures not listed in this section, you can find replacement
instructions here:
http://thinksystem.lenovofiles.com/help/index.jsp?topic=%2F7X05%2Fmaintenance_manual_hardware_
replacement_procedures.html
For more information about ordering parts:
ThinkAgile HX2320 (7X83)
https://datacentersupport.lenovo.com/us/en/products/solutions-and-software/thinkagile-hx/hx2320/7x83/parts
ThinkAgile HX2321 (7Y89)
https://datacentersupport.lenovo.com/us/en/products/solutions-and-software/thinkagile-hx/hx2321/7y89/parts
ThinkAgile HX2321 (7Z04)
https://datacentersupport.lenovo.com/us/en/products/solutions-and-software/thinkagile-hx/hx2321/7z04/parts
Note: If you replace a part, such as an adapter, that contains firmware, you might also need to update the
firmware for that part.
Installation Guidelines
Before installing components in your server, read the installation guidelines.
Before installing optional devices, read the following notices carefully:
Attention: Prevent exposure to static electricity, which might lead to system halt and loss of data, by
keeping static-sensitive components in their static-protective packages until installation, and handling these
devices with an electrostatic-discharge wrist strap or other grounding system.
• Read the safety information and guidelines to ensure that you work safely.
– A complete list of safety information for all products is available at:
http://thinksystem.lenovofiles.com/help/index.jsp?topic=%2Fsafety_documentation%2Fpdf_files.html
– The following guidelines are available as well: "Handling static-sensitive devices" on page 41 and
"Working inside the server with the power on" on page 41.
• Make sure the components you are installing are supported by the server. For a list of supported optional
components for the server, see
• When you install a new server, download and apply the latest firmware. This will help ensure that any
known issues are addressed, and that your server is ready to work with optimal performance. For
downloading firmware updates for your server, go to:
https://support.lenovo.com/us/en/solutions/ht507044
© Copyright Lenovo 2019
http://static.lenovo.com/us/en/serverproven/index.shtml
.
39
Advertisement
Table of Contents
