Snooze Feature - Sangean PR-D4VW Instruction Manual

Getting Started
BEEP TONE ALARM "HWS" (HUMANE WAKE SYSTEM)
At the chosen alarm time a beep tone will sound and increase in
volume every 15 seconds for one minute followed by one minute
of silence before repeating the cycle. The HWS alarm will sound
for one hour or until its turned off by pressing the power button.
Once the power button has been pressed the alarm will reset
itself to sound the next day at the time previously chosen.
To shut off the alarm:
Press and hold the Radio Alarm or Beep Tone Alarm
Button until you hear a short beep and the alarm
symbol disappears.

SNOOZE FEATURE

When the Radio or Beep Tone alarm is sounding, if you press any
button except the Power Button, the alarm will temporarily stop for
five minutes. The little "Zs" and Alarm symbol will
flash on the display while the radio is in snooze mode.
To shut off the alarm and snooze feature press the
Power Button.
DISPLAY BUTTON
With the radio off, the display button activates the
LCD backlight display. The light will remain on for
approximately 15 seconds.
With the radio on, the display button activates the LCD backlight
display and switches the display from the frequency to the clock.
To switch back to the frequency, press the display button again.
Page 10 Sonido Radio