Getting Started; Powering Your Radio - Sangean PR-D4VW Instruction Manual

Getting Started

POWERING YOUR RADIO

Before powering your radio be sure to read
the Safety Instructions on pages 22 and 23.
The Sonido Radio will run on (4) "D" size NiMH or alkaline batter-
ies or on 120V AC house current using the AC power adapter.
Batteries are optional. If the AC power adapter is removed from
the radio for more than three minutes, without batteries, you will
lose clock, alarm and any memory settings. The Sonido will not
charge batteries.
AC POWER ADAPTER OPERATION
Before you plug the AC power adapter into an outlet, be sure the
AC voltage is 120Volts/60Hz. If you have batteries in the radio
and you use the AC power adapter, the batteries will automatically
be disconnected.
NOTE: If you remove the power adapter without turning the radio
OFF, the radio will automatically revert to the batteries.
NOTE: The AC adapter should be disconnected from the main
supply when not in use for prolonged periods of time.
Sonido Radio
Insert the AC Power Adapter
plug into the DC jack on the
left side of the radio.
Page 5