Special Danger Warnings / Residual Dangers; Symbols Used On The Lifting Accessoryn; Dangers Due To Falling Loads; Dangers From Hot Surfaces - HALDER EH 22352 Translation Of The Original Operating Instructions

2 Safety

2.5 Special danger warnings / residual dangers

2.5 Special danger warnings / residual dangers
2.5.1

Symbols used on the lifting accessoryn

Keep all safety and danger information on the threaded lifting pins in a legible
condition. Renew this information as necessary.
2.5.2

Dangers due to falling loads

WARNING
2.5.3

Dangers from hot surfaces

WARNING
Observe the original operating instructions
This symbol indicates that the original operating instructions must be
observed.
CE marking
The CE marking on the product is the manufacturer's declaration that the
product complies with the essential requirements of the relevant European
health, safety and environmental protection legislation.
Risk of injury due to loads falling down when opening the threaded
lifting pins!
A failure to observe this can result in death or serious injury!
Ensure that the locking push element can never be actuated under load.
–
Please note that during operation an opening of the threaded lifting pins
–
must be ruled out by suitable countermeasures.
During use or at work always wear the protective equipment necessary
–
for the work in question.
Burning danger due to hot surfaces!
Non-compliance may result in minor injuries!
Hot loads can transfer heat to the threaded lifting pins !
Wear protective gloves when handling hot loads.
–
21