HALDER EH 22352 Translation Of The Original Operating Instructions page 15

2 Safety
2.1 Intended use
in the technological data must not be exceeded. The load values F1, F2 and F3 apply to
lifting in a steel receptacle. The field of application of threaded lifting pins is in the
industrial sector. The threaded lifting pins are not intended for different modes of
operation, as it is a manual tool. threaded lifting pins are not intended for any other use
than the use listed here; other uses would be considered improper use. In particular, it is
prohibited
to mark the threaded lifting pins subsequently in colour (especially in red), to avoid
–
confusion with high-strength anchor points,
to exceed the maximum load of the threaded lifting pins (see "3.3 Technical data"),
–
to use the threaded lifting pins after exceeding the maximum permissible load cycles
–
(see "3.3 Technical data"). After exceeding the maximum permissible load cycles (see
"3.3 Technical data"), the threaded lifting pins must be permanently taken out of
operation,
to use the threaded lifting pins as a protective device or safety function,
–
to use the threaded lifting pins as a pulling element,
–
not to produce the installation sketch according to the specifications of the company
–
Erwin Halder KG,
to use defective or unsuitable accessories,
–
to operate the threaded lifting pins if the functional components are deactivated,
–
manipulated or defective,
to operate the threaded lifting pins while untrained persons are in the danger zone,
–
to operate the threaded lifting pins if they are not ready for operation or have been
–
modified,
to operate the threaded lifting pins without instruction.
–
to use the threaded lifting pins only inserted, without using locking,
–
to use the threaded lifting pins for constantly rotating loads,
–
to use the threaded lifting pins for lifting, holding or carrying persons,
–
to actuate the locking push element under load,
–
to place objects on the threaded lifting pins. Remove all objects that are on the
–
threaded lifting pins.
15