Foreseeable Misuse - HALDER EH 22352 Translation Of The Original Operating Instructions

2 Safety
2.1 Intended use
In case of non-compliance, the threaded lifting pins lose their EC conformity. With this,
the manufacturer of the threaded lifting pins is outside of the warranty.
Immediately replace components that are not in problem-free condition.
Only use original spare parts / wear parts / accessories. These parts are specially
designed for the threaded lifting pins. For parts purchased from third parties it cannot be
guaranteed that they have been designed and manufactured to meet the requirements on
stress and safety.
Parts and optional equipment not supplied by Erwin Halder KG are not approved for use
on the threaded lifting pins.
2.1.2

Foreseeable misuse

Any use of the threaded lifting pins beyond the intended use, and/or other use, can lead
to serious injuries.
Do not use the threaded lifting pins in case of lack of maintenance or inspection.
–
Never use the threaded lifting pins without the locking.
–
Do not use the threaded lifting pins with constantly rotating loads.
–
Do not use the threaded lifting pins to lift, hold or carry people.
–
Avoid jerky loads.
–
Never use the threaded lifting pins in a nut thread that is not true to gauge,
–
Never use the threaded lifting pins if they are not fully inserted into the nut thread;
–
thread flanks can be on top of each other when inserted - push element does not
come out and threaded pin does not lock.
Overload or misuse can lead to failure of the lifting equipment. Load can fall.
–
17