Warranty And Liability - HALDER EH 22352 Translation Of The Original Operating Instructions

1 Introduction

1.2 Warranty and liability

1.2 Warranty and liability
The obligations agreed in the supply contract, the general terms and conditions as well as
the terms of delivery of the threaded lifting pins and the legal regulations valid at the time
of the conclusion of the contract apply.
All information and notices in these original operating instructions have been compiled
taking into account the applicable standards and regulations, the state of the art and our
many years of knowledge and experience.
These original operating instructions are not intended to be, and should not be used as a
substitute means of determining the suitability or reliability of the threaded lifting pins for
any particular user application. It is the duty of the manufacturer or distributor to carry out
an adequate and complete risk assessment, and evaluation and testing of the threaded
lifting pins with regard to the respective specific application or use in question.
Warranty and liability claims for personal injury and damage to property are excluded if
they are attributable to one or more of the following causes:
improper or inappropriate use of the threaded lifting pins,
–
improper assembly, commissioning, operation, servicing and cleaning of the threaded
–
lifting pins,
use of the threaded lifting pins with defective components or improperly installed or
–
non-functional components,
a failure to observe the original operating instructions and the notices in the original
–
operating instructions regarding assembly, commissioning, operation, servicing and
cleaning of the threaded lifting pins,
use of unqualified or untrained personnel,
–
structural changes to the threaded lifting pins (Conversions or other changes to the
–
lifting accessory may not be made without the prior written consent of Erwin Halder
KG. In case of infringement, the threaded lifting pins lose their EC conformity),
improperly performed repairs,
–
use of non-approved spare parts or use of spare parts that do not meet the technically
–
specified requirements,
disasters, effects of foreign bodies, and force majeure.
–
Furthermore, Erwin Halder KG reserves the right to revise this publication at any time if
technical changes are made in the course of improvements to usage properties and
further development, without obligation to notify any person of the revisions.
12