Staff Requirements; Responsibilities; Obligation Of The Staff - HALDER EH 22352 Translation Of The Original Operating Instructions

2 Safety

2.2 Staff requirements

2.2 Staff requirements
The threaded lifting pins may only be transported, installed, operated, maintained,
repaired, commissioned and decommissioned, inspected or disposed of by persons who
are qualified and / or instructed to do so. These persons must know the original operating
instructions and act accordingly. The respective powers of the staff should be clearly
defined.
The following qualifications for various fields of activity are specified in the original
operating instructions:
Personnel to be trained
Personnel to be trained, such as an apprentice or a temporary worker, are not aware of
all the dangers that can occur when operating the threaded lifting pins. They may only
perform work on the threaded lifting pins under the supervision of qualified or instructed
personnel.
Instructed personnel
Instructed personnel have been instructed by the operator or by qualified personnel about
the tasks assigned to them and possible dangers in case of improper behaviour.
Qualified personnel
Due to their technical training, knowledge and experience as well as knowledge of the
relevant regulations, qualified personnel are able to carry out the work assigned to them
and to independently recognise and avoid possible dangers.
2.2.1

Responsibilities

Improper handling can lead to considerable personal injury and damage to property.
Therefore, have all activities carried out only by personnel qualified for them.
Only persons who can be expected to carry out their work reliably are permitted as
–
personnel. No persons may work on the threaded lifting pins if their ability to react is
impaired by drugs, alcohol, medication or similar.
All persons working on the threaded lifting pins must read the original operating
–
instructions and confirm that they have understood them by signing them.
Personnel to be trained may initially only work on the threaded lifting pins under the
–
supervision of qualified personnel. The completed and successful instruction must be
confirmed in writing.
The operator is responsible for instructing the personnel.
2.2.2

Obligation of the staff

Before starting work, all persons charged with working on the threaded lifting pins
undertake
to observe the basic regulations on work safety and accident prevention,
–
18