Troubleshooting - Fimar H/220 Use And Maintenance

TROUBLESHOOTING

The purpose of the following information is to help the operator to identify and correct
any anomalies or malfunctions that may occur during use.
If one of the faults listed in the table occurs, inform the manufacture to actively contrib-
ute in developing new solutions and improving construction techniques.
Some faults may be resolved by the user, others require specific technical skills or abil-
ities and must only be performed by qualified personnel with recognised experience in
the specific sector.
Important
Do not remove internal appliance parts.
The manufacturer is not liable for any machine tampering!
Table 2: Operating malfunctions
Problem
GB
Food product is not cut correctly
("torn" and/or irregular shape).
The cutting blade is not
correctly sharpened.
The carriage does not slide
evenly.
Causes
Cutting blade dull.
Cutting blade worn
The sharpening disks are worn.
Guide lubrication insufficient
- 24 -
HAND WHEEL
SLICERS
Solutions
Sharpen the blade
Contact your dealer or
authorised service centre.
Replace the disks at the dealer
or at an authorised service
centre.
Lubricate the carriage guide.
English language