Arrow Storage Products VAR1012S Owner's Manual & Assembly Manual page 36

Step 13: Continued
You will need for this page:
(QTY: 16)
FASTEN TO RIDGE CAP (NEXT TWO PAGES)
FASTEN TO ROOF BEAMS WITH SCREWS
FASTEN TO NEXT PANEL WITH BOLT AND NUT
DO NOT FASTEN AT THIS TIME
(QTY: 4)
2
7743 6869
Roof Panel Ridge Cap
Continue to apply weather stripping.
9
Attach two (2) Roof Panels using the
diagram to the left while assembling the
roof.
Attach Long Ridge Cap with two (2) bolts
10
and nuts. DO NOT secure end of Ridge
Caps until Peak Caps are in place.
Do not fasten the holes on the lower end
11
of the Panels. Double check that Panels
are installed in the correct position. The
part numbers listed in the Roof Panel Placement
diagram on page 32 must match the numbers
inked on the Panels.
7743
DO NOT fully tighten Ridge Cap bolts until you
have both Ridge Cap bolts in place. This will ease
assembly. Bolts must be fully tightened before moving on
to the next page.
36
1
DO NOT secure end of Ridge Caps
until Peak Caps are in place.
6869
7743
36AZ