Carrier XCT7 40VCW317FQEE Installation And Owner's Manual page 22

Operation
In basic setting interface, press Up/Down key to adjust unit number; press Left/Right key to move the cursor.
Some functions are not available for some models and the information is gray.
ECO
The energy saving default parameters are listed below:
74°F Lowest temperature limit of Cooling and Dry mode.
78°F Highest temperature limit of heating mode.
74°F~86°F Temperature adjustment range in Cooling and Dry mode.
60°F~78°F Temperature adjustment range in Heating mode.
Four direction keys can move the cursor, when the arrows flash, press enter key to stop the flashing and press Left/
Right key to adjust the value, then press Enter to confirm. After setting ECO function, the temp adjustment will be
limited. If you set the 'overrun', the temp, can be adjust out of ECO rage in allowable time.
Setting
Range of temp
Temp.
ECO
The highest limit
of heating
The lowest limit
of cooling / dry
Return
M o n d a y
ECO
2011.11.03
ON OFF
26.0 F
o
23.5 F
o
Enter
20
10:30
AM
Main