Summary of Contents for Commercial Electric FSNX28-5CCT-BZ
Page 1
THANK YOU We appreciate the trust and confidence you have placed in Commercial Electric through the purchase of this LED flood light. We strive to continually create quality products designed to enhance your home. Visit us online to see our...
This light fixture requires a 120 Volt AC 47 CFR & 2.1077 Compliance Information power source. Unique Identifier: PART NUMBER Some codes require installation by a (e.g. FSNX15-5CCT-BZ / FSNX28-5CCT-BZ) qualified electrician. Responsible Party – U.S. Contact Information This light fixture must be properly grounded.
Warranty (continued) LIMITATION OF LIABILITY In no event shall the manufacturer be liable for indirect, consequential, incidental or special damages, or lost profits. The manufacturer is not liable for any claims or damage arising out of or connected with the manufacture, sale, delivery, use, maintenance and repair or modification of the manufacturer products, or supply of any replacement parts that exceed the purchase price of the manufacturer products giving rise to a claim.
Pre-Installation (continued) PACKAGE CONTENTS Part Description Quantity Light fixture 1/2 in. NPS Threaded knuckle mount stem Wall/Eave mounting plate cover Mounting plate (shipped installed) Mounting plate set screw Hands-free mounting wire Conduit lock nut for knuckle mount Remote control NOTE: Alternate mounting accessories are not provided in the box. They are available separately from your retailer.
Please contact your plate with center hole post (sold separately) retailer or Commercial Electric customer support. (fig 3). (fig 4). Shut off electric power off Verify the wall switch is in the OFF position (fig 5).
Page 6
Installation (continued) OPTION: Assemble the wall/eave mounting plate cover (for wall/eave mounting over standard (fig 8) recessed junction box) NOTE: The fixture comes with the knuckle stem and the wall/eave mounting base plate cover (C) in the box. □ Place the sealing gasket (FF) on the knuckle stem and thread wires through the hole of the (fig 9) wall/eave mounting plate cover (C), being...
Page 7
Installation (continued) Attach the mounting plate to junction box (for wall/eave mounting over standard recessed junction box) To remove the mounting plate (D) from the back of the fixture, loosen the set screw (E) using the hex head allen key (CC). (fig Align the holes of the mounting plate (with the "TOP"...
Page 8
Installation (continued) Make the electrical connections If necessary, strip 3/8 in. of insulation from the junction box and lighting fixture wires. Connect wires by twisting the exposed wires together and using the wire nuts (BB). Swivel Knuckle Flood/ Wall Mount Ensure there are no loose wires.
Page 9
Installation (continued) Seal with caulking For recessed junction box mounting, caulk around the back face of the light fixture shown in (fig 20) with silicone sealant (not included). (fig 20). For surface mount junction box applications, caulk between the junction box and mounting plate with silicone sealant (not included) as shown in (fig 21).
Operation Select color temperature (CCT) Standing within 15 feet, aim the remote control (H) at the front of the light fixture. The remote has six buttons: ON/OFF, 2700K, 3000K, 3500K, 4000K and 5000K. Press the buttons to preview the correlated color temperatures (CCT).
Operation SWITCH-CONTROLLED SWITCH Switch-controlled operation enables the light fixture to turn ON and OFF by flipping a standard light switch. Dusk-to-Dawn control requires the addition of an external photocell, sensors or timer (sold separately). CONTROLLED Once the fixture is installed, turn power back on from the circuit breaker and switch.
Page 12
Questions, problems, missing parts? Before returning to the store, call Commercial Electric Customer Service 8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-844-584-3776 HOMEDEPOT.COM Retain this manual for future use.