Table of Contents
Advertisement
1.
Position the element of your scene that you want to be correctly exposed in the center of your viewfinder.
2.
Press the FV Lock button on your camera. The flash will fire a test shot and lock its output level.
3.
Reframe your image as desired and take the shot.
For more information about the flash exposure lock feature, consult your camera's manual.
Using Flash Exposure Compensation
In automatic TTL mode, you can use flash exposure compensation to adjust the VS-560N's flash output
incrementally, just as you would adjust exposure with the exposure compensation function on your camera.
To apply flash exposure compensation, press the up or
down buttons on the flash to increase or decrease flash
exposure by 1/3 stop—up to 3 stops total. The LCD
will display EV+ or EV- next to the exposure value to
indicate whether it is increased or decreased.
TTL
Using Flash Exposure Compensation
EV+
|
21
Advertisement
Table of Contents
