Tci Unit And Charging Coil - Yamaha MZ250 2012 Supplementary Service Manual

TCI UNIT AND CHARGING COIL

1 High tension code
2 Flywheel
3 Charging coil
4 Clamp
5 TCI unit
A Make sure that the high ten-
sion cord is not pinched when
installing the flywheel cover.
B Adjust the TCI unit air gap
between 0.4–0.6 mm (0.0157–
0.0236 in) on both sides.
WIRE ROUTING DIAGRAM
4-14
SPEC