Champion CHSD410 User Manual page 9

1
4. Clean off the hair/dust of the long strip entanglements on the revolving brush with scissor.
(4)
5. If necessary, flush the revolving brush with water, and place it back into the floor brush after
drying.
6. Remove the rubbish accumulated on the suction nozzle or the surface.
7. Ensure that the driving belt has been assembled correctly with the motor and the brush.
The brush will not revolve if the belt is placed in incorrect position.
Dust Container
Remove the rubbish/dust attached with a dry cloth. Wash with water if necessary.
Filter
1. Clean the rubbish/dust in the filter element and the filter screen by carefully knocking it.
2
Driving belt
4
3
5
EN
8