Champion CHSD410 User Manual page 5

Assembly
Charging Socket
Assemble the upper part and the bottom part of the charging socket together. Insert the power
supply port of the adapter into the power supply hole on the bottom plate and place the wire along
the groove.
Handle and Hand-held Unit
Installation of hand held unit:
Place the front end of the dust cup into
the base groove firstly, and then push
the hand-held vacuum cleaner into the
base, until a sound of "click", and the
product is installed in a correct way.
Assembly of handle:
Loosen the screw of the outer side of
the base firstly, and insert the handle
into the base, and tighten the screw
back with tools. (As shown in Step 1, 2
and 3)
Preparation for Charging
1. Insert the charging port of the vacuum cleaner into the socket of the charging base.
2. Insert the power supply plug of the adapter into the socket.
3. The charging begins when the power supply indicator light of the vacuum cleaner turns to red.
4. The charging will be ended automatically about 5 hours later, the power supply light turns off.
Lock catch button
EN
4