Advertisement
Corner Trim
Wide Corner Trim
64.
To trim out corners, start with Narrow Trim, align tight
underneath Soffit and Rafter. Align Wide Corner Trim
with bottom of Corner Trim. Do a dry run in each corner
before attaching to confirm positioning. Use 8 - 1 1/2"
Finishing Nails per piece to secure. Complete other front
corner as above.
65.
Trim out rear corners with remaining
pieces of Corner Trim and Wide Corner
Trim. Align and attach with 8 - 1 1/2"
Finishing Nails per piece as per Step 64.
66.
Attach Rear Horizontal Gable Trim to the
back of shed. Position over gable and wall seam
with thick end of Bevel downward. Use 5 - 1 1/2"
Finishing Nails to secure each piece.
Parts (Steps 66)
Rear Horizontal Gable Trim - Bevel
(3/4" x 4 1/2" x 43 3/8") x 2
Hardware (Steps 66)
N1 - 1 1/2" Finishing Nails
x 10 total
Toll Free 1-888-658-1658
www.outdoorlivingtoday.com
Page 31
Parts (Steps 64 - 65)
Corner Trim
(1/2" x 3 1/2" x 79") x 4
Wide Corner Trim
(1/2" x 5 1/2" x 82") x 4
Hardware (Steps 64 - 65)
N1 - 1 1/2" Finishing Nails
x 64 total
sales@outdoorlivingtoday.com
Advertisement
