Advertisement
11 .
With Plywood
positioned correctly on
floor framing, attach
with 1 1/4" screws. Use
screws every 16".
B. Wall Section
Gable Walls
(4)
Side Top Plates
(2 per side)
Angle cut on edge
Solid Wall
Panel (6)
Door Header
12.
Starting with Solid Wall Panels, carefully
lay panel face down. Position and attach Bottom
Wall Plate to bottom of wall studs of each wall
panel with 3 - 2 1/2" screws. Position so plates
are flush with framing. Note: some Bottom Wall
Plates may already be attached to some walls.
Toll Free 1-888-658-1658
Hint: Use a chalk
line to mark location
of floor joists to
determine
placement.
Exploded view of all parts necessary to
complete the Wall Section. Identify all
parts prior to starting.
Narrow Wall Panel
(12" wide)
Bottom Wall Plate
Parts (Step 12 )
Solid Wall Panels
(45 1/2" x 75") x 6
Bottom Wall Plates
(1 1/2" x 2 1/2" x 45 1/2") x 6
www.outdoorlivingtoday.com
Page 10
screw
Front and Rear Top
Plates (3 per side)
2 Angle cut on 1 end and 1
square cut.
Window Wall
Panel (1)
Door Jamb
Hardware (Step 12 )
S1 - 2 1/2" Screws
x 36 total
sales@outdoorlivingtoday.com
Advertisement
