Advertisement
34.
Locate 6 Rafters, 2 Soffits and
completed Ridge Board from Step 33.
Lay out as illustrated on a flat level sur-
face.
Parts (Step 34 - 42)
Rafters
(1 1/2" x 3 1/2" x 56 1/2")x 12
Soffits
(1/2" x 4 1/2" x 45 1/2")x 4
Hardware (Step 34 - 42)
S1 - 2 1/2" Screws
x 6 total
S2 - 1 1/4" Screws
x 48 total
S3 - 2" Screws
x 24 total
35.
Attach end of a 45 1/2" long Soffit Board flush to ends of outside
Rafter with 2 - 1 1/4" screws per Rafter end. Drill pilot hole in Soffit
ends to prevent splitting. Attach Ridge Board to opposite rafter end
with 2 - 2" screws, while aligning to bottom of rafter . Center Soffit on
Doubled-up Rafters and secure with 2 - 2" screws. Measure 45 1/2" from
outside rafter and secure Ridge Board to rafter with 2 - 2" screws. Attach
Doubled-up Rafters together with 3 - 2 1/2" screws.
36.
Measure, position and attach mid rafters as illustrated above as per Step 35.
Toll Free 1-888-658-1658
Ridge Board
Important: Pilot Hole Ridge
Board & Soffits to prevent
splitting!
45 1/2"
20 1/2"
91"
Centered on
Rafter
www.outdoorlivingtoday.com
Page 19
56 1/2" Rafters
4 1/2" wide
Soffits
Ridge Board
Important: Ridge
Board must be aligned
as illustrated.
45 1/2"
20 1/2"
23 1/2"
mid rafter
sales@outdoorlivingtoday.com
Advertisement
