Advertisement
51.
To complete opposite side of roof repeat Steps 46 - 50.
Important: Do not fasten down Metal Roof Panels with
Hangers still in place. Metal Roof Hangers will temporarily help
keep Metal Roof Panels in place before they are fastened.
52.
Locate 3 Metal Roof Panels and 3 Metal Roof Hangers. To tem-
porarily hold the Metal Roof Panels in place, hook a Metal Roof Hanger
onto the lowest Batten, approximatley where the center of the panels will
be. Place first Metal Roof Panel on Battens and into Hanger. Do not fas-
ten panels down until Step 57. Place remaining 2 panels and hangers on
the same way. Metal Roof Panels will overlap eachother.
Toll Free 1-888-658-1658
Hardware (Step 51)
S2 - 1 1/4" Screws
x 36 total
www.outdoorlivingtoday.com
Page 25
Parts (Step 46)
Roof Battens
(3/4" x 3 1/2" x 48 1/4") x 8
Batten Spacers
(3/4" x 1 1/2" x 14") x 6
Parts (Step 52)
Metal Roof Panels
(39" wide x 61" long) x 3
Hardware (Step 52)
Y38 - Metal Roof Hangers
x 3
sales@outdoorlivingtoday.com
Advertisement
