Advertisement
Notched at top
Flashing
29.
Locate Gable 1/2 Walls for both sides of shed.
Align framing and gable lapp siding together. Screw
center gable wall framing of each piece together
with 3 - 2 1/2" screws. Note: prior to attaching, try
each combination of Gables for best fit.
30.
Lift up a completed gable section and place on top of Rear Top Plate on wall. The rear gable
framing should sit flush with the inside of the top plate.
Toll Free 1-888-658-1658
Parts (Steps 29-32)
Gable Half Walls
Triangular shaped x 4
www.outdoorlivingtoday.com
Page 16
Male & Female
Notch Ends
Flashing
Hardware (Steps 29-32)
S1 - 2 1/2" Screws
sales@outdoorlivingtoday.com
x 6 total
S3 - 2" Screws
x 4 total
Advertisement
