English / Metric Conversion - Energetics POWER RUN 14.9 Owner's Manual

IMPORTANT INFORMATION:
SAFETY KEY
The safety key must be inserted into the slot on the console and pushed all the way up in order to operate the
treadmill. Always insert the safety key and attach the clip to your clothing at your waist before beginning your
workout. If you should encounter problems and need to stop the motor quickly, simply pull down the safety key
to shut down the power. To continue the operation, please turn off the power switch, wait a few seconds and
switch it on again, insert the safety key and push it up to the end.

ENGLISH / METRIC CONVERSION

The treadmill computer display can show METRIC and ENGLISH information. This should be preset for your area by the
factory. However, in case the treadmill needs to be converted between METRIC and ENGLISH readout, please follow the
procedure below:
Set the POWER SWITCH to ON. Press the START button on the computer and hold it. Insert the SAFETY KEY then release
the START button. The computer will sound one short beep. Press the START button to switch between ENGLISH and
METRIC and press STOP button to confirm the setting. The computer will sound a long beep and will return to the POWER
ON mode with the new setting.
POWER ON
Set the POWER SWITCH, located on the base frame, to ON and insert the SAFETY KEY. All LED windows light up with a
short beep sound. If no further button inputs are made within 4 minutes, the computer will enter the SLEEP MODE. Press
any button to return to the POWER ON mode.
SLEEP / DISPLAY MODE
When the power is ON the computer will automatically enter SLEEP MODE if it is left idle for 4 minutes without
receiving any input. Press any button to return to POWER ON status when the computer is in the SLEEP
MODE.
If you don't want to use SLEEP MODE, and wonder to get always light up status (DISPLAY MODE) on the
screen, then please consult the following procedure. Firstly, pull out the safety key, furthermore press and hold
the SPEED UP and DOWN buttons, insert the safety key to power on the treadmill. The computer will reply a
short beep sound and shows "1" on the display, press "START" button to enter this setting program, and press
the INCLINE UP and DOWN buttons to switch between "ON" (SLEEP MODE features on) and "OFF" (SLEEP
MODE features off) in following step. Finally, please presses STOP/ENTER two times to save this setting and
return to POWER ON mode.
STOP / ENTER
When the treadmill is running, press the STOP button to pause the treadmill at any time. All figures on the displayed on the
LED will freeze; furthermore the display shows "PAUSE". Press START to resume the program and all displays will continue
the performance until the program finishes. If you continue pressing the STOP twice, then all data will return to 0 and the
treadmill will return to POWER ON status. If there is no action within 4 minutes, the treadmill will return to POWER ON
status.
MODE
Switches the LED window display information:
b. The computer has a factory setting that auto switches between TIME, SPEED, PULSE, DISTANCE, CALORIES
and INCLINE LEVEL. Each value will be displayed for 5 seconds.
c. Press the MODE button once to display only SPEED, TIME and PULSE.
d. the MODE button a 2
e. Press the MODE button a 3
nd
time to display only CALORIES, DISTANCE and INCLINE LEVEL.
rd
time return to the auto switch display.
4