Battery And Charging - aventon SINCH Owner's Manual

BATTERY AND CHARGING

The Sinch uses a Lithium-Ion battery which can be charged on
or o the bike. We recommend charging the battery indoors, in
moderate temperature conditions. To charge the battery, plug the
charger into the charging port and then connect the charger to a
wall outlet. The LED indicator light will be red when charging and
will turn green when charging is complete. When finished, unplug
the the charger from the wall outlet.
Take care of the battery to ensure a long service life:
• Charge and store the battery indoors if possible. The
battery can be removed from the bicycle for this purpose.
• Avoid extreme hot and cold temperatures.
• DO NOT submerge your bike or any of the components in
water. This action will void the warranty.
To optimize the performance of the battery over time, try and use
it (discharging and charging) at least monthly. But if you won't
be riding your Sinch for a long period of time, it's best to store
the battery fully charged. After many charging and discharge
cycles, runtime and range will be reduced. Replacement batteries
are available from Aventon to extend the life of your ebike. The
lifespan of the battery is about 500 charge / discharge cycles.
The Sinch internal battery slides onto a track inside the frame.
When installing the battery, take care to ensure the rails on the
bottom of the battery correctly engage to the track of the frame.
7 SINCH OWNER'S MANUAL