Getting Started - aventon SINCH Owner's Manual

GETTING STARTED

The Sinch is operated using the control pad on the handlebars.
The control pad is located near the left-hand brake lever.
Press and hold the "M" button on the handlebar controls to turn
and hold "M" for 3 seconds.
pedal assist, simply start pedaling, then tap the "U" or "D" arrows
to increase or decrease the amount of pedal assist from 0-5.
Pedal assist will engage at speeds up to 20 MPH / 32 KPH.
The Sinch ebike is equipped with a throttle, which is mounted
near the rider's left thumb, to propel the bike without pedaling.
You can engage the throttle anytime including from a complete
stop while in PAS 1 through 5. However, we strongly encourage
you to pedal first before engaging the throttle. The throttle can
propel you at speeds up to 20 MPH.
The motor stops when you: stop pedaling, squeeze the brake
levers, or release the throttle. Simply start pedaling again to re-
engage the motor.
SINCH OWNER'S MANUAL 2