Battery And Charging - aventon PACE 500 Owner's Manual

BATTERY AND CHARGING

The Pace 500 uses a Lithium-Ion battery which can be charged
on or o the bike. We recommend charging the battery indoors, in
moderate temperature conditions. To charge the battery, plug the
charger into the charging port and then connect the charger to a
wall outlet. The LED indicator light will be red when charging and
will turn green when charging is complete. When finished, unplug
the the charger from the wall outlet.
Take care of the battery to ensure a long service life:
• Charge and store the battery indoors if possible. The
battery can be removed from the bicycle for this purpose.
• Avoid extreme hot and cold temperatures.
• DO NOT submerge your bike or any of the components in
water. This action will void the warranty.
To optimize the performance of the battery over time, try and use
it (discharging and charging) at least monthly. But if you won't
be riding your Level for a long period of time, it's best to store
the battery fully charged. After many charging and discharge
cycles, runtime and range will be reduced. Replacement batteries
are available from Aventon to extend the life of your ebike. The
lifespan of the battery is about 500 charge / discharge cycles.
When you install the battery on the Pace 500, lock it into place
with the supplied key. To unlock it for removal, use the key. Do
not ride the bicycle if the battery rattles or moves - it should be
firmly attached.
7 PACE 500 OWNER'S MANUAL