Customizing The Display; Function 01P; Function 02P; Function 03P - aventon SINCH Owner's Manual

CUSTOMIZING THE DISPLAY

You can use the settings features of the display to customize the
Sinch for your use. To enter the "Settings" mode, hold the "U" and
"D" buttons at the same time for 2 seconds.
You can customize 4 out of the 5 di erent functions on the
display. Tap the "M" button to move from function to function, and
use the "U" and "D" arrows to adjust each to your preferences.
When you are finished, press and hold the "M" button to
save your changes. Note: The system will save your changes
automatically after 8 seconds.
FUNCTION 01P - BACKLIGHT BRIGHTNESS
You can control how bright you'd like the display backlight
to be. 1 being the dimmest and 3 is the brightest.
FUNCTION 02P - UNIT OF MEASURE
You can toggle between miles or kilometers, based on your
preference.
FUNCTION 03P - BATTERY VOLTAGE
This function sets the battery voltage of the system. On the
Sinch, this function is locked at 48V to match the battery
and motor, and cannot be changed.
5 SINCH OWNER'S MANUAL