Limiting User Access To Your Ip San With The Security Manager - Adaptec 5325302053 User Manual

Modifying the Authentication Settings
You can add authentication, change authentication methods, or remove
authentication from any provisioned volume or logical device. You can change the
access settings for any provisioned volume or logical device.
To change an authentication setting:
In the Logical Devices View, right-click the words
1
Modify logical devices
The wizard opens.
Change the authentication settings as required. (For more detailed instructions,
2
see Step 7 of "Provisioning Storage Manually" on page 42.)
Click
3
Next
Click
Back
Click
4
Apply
The authentication settings are modified.
Limiting User Access to Your IP SAN with the Security
Manager
To protect your IP SAN, you can use Adaptec Storage Manager's Security Manager
to control which users can access and modify your iSCSI storage.
Each Adaptec Storage Manager user is given a password and is assigned one of two
access privilege levels, Administrator level or Operator level (see page 87). To access
Adaptec Storage Manager and your IP SAN, the user enters his or her password
when logging in to the Management Service (see Step 2 on page 35).
Multiple users can be logged into the same Management Service at the same time.
Note
A user is associated with a specific Management Service. If your IP SAN includes
more than one Management Service, you can:
• Add the same user to all Management Services, or limit that user to specific
Management Services only.
• Assign the same user different privilege levels on different Management Services.
.
to continue, click
Next
to change the configuration.
, then click .
Yes
Logical devices
Right-click here
again, then review the configuration summary.
, then select