Registering Your Scsi Card - Adaptec AHA-2930CU Installation Manual

Installing the Driver When Windows 98 is Already Installed
To update or install the driver if Windows 98 is already installed
1 Start Windows 98.
2 Click Start, point to Settings, then click Control Panel. Double-click
System. Click on the Device Manager tab.
3 Click the plus sign (+) next to Other Devices, then double-click PCI
SCSI Bus Controller to open the PCI SCSI Bus Controller Properties
window. Click the Driver tab, then click Update Driver.
4 Click Next. Click Next again. Insert the SCSI Card 2930 CD into your
CD-ROM drive.
5 Select CD-ROM drive and deselect Floppy disk drive by clicking in
the check boxes. Select Specify a location, then browse to the
location of the driver on the CD. (The driver file is
Then click Next.
6 Click Next.
7 Click Finish to complete the installation. Click Yes to restart your
computer. (You must restart your computer for the changes to take
effect.)

Registering Your SCSI Card

To register your SCSI Card 2930CU, go to
you don't have Internet access, complete and return the registration card
located on the SCSI Card 2930 CD.
www.register.adaptec.com
15
.)
aic78xx.mpd
. If