Advertisement
Connecting External SCSI Devices
You can connect external Ultra320/160 and Ultra2 SCSI devices to
the 68-pin external LVD/SE VHDCI SCSI connectors. Each external
device will require a 68-pin VHDCI external LVD SCSI cable.
Note: We recommend that you do not combine older SCSI
devices with the newer Ultra320/160 and Ultra2 SCSI devices
on the same SCSI channel of the Adaptec SCSI Card 39320A.
Follow these steps to connect your external SCSI devices:
1
Connect one end of an external SCSI cable to one of the external
Ultra320/160 connectors on the Adaptec SCSI Card 39320A.
2
Connect the other end of the cable to a SCSI connector on the
back of an external device. If you are installing only one
external device, terminate the device and skip to Step 4.
68-pin external LVD/SE VHDCI
SCSI connectors
VHDCI External LVD SCSI
cable
SCSI terminator
8
Advertisement
