Table of Contents
Advertisement
M
I
ORE
NFORMATION
The last SCSI device on the end of each SCSI bus cable must be
terminated, and termination must be disabled for all other devices
in the middle of the cables. Ultra320/160 and Ultra2 SCSI devices
are automatically unterminated, but Ultra SCSI and Fast/Wide
SCSI devices do have termination that you must check. For more
information, refer to the documentation for each SCSI device.
If you are using external Ultra2 or Ultra320/160 devices, be sure
to use an LVD terminator to terminate the last device in the chain.
If you use a single-ended, active terminator (sometimes called an
Ultra terminator) the SCSI devices will not operate properly.
T
ROUBLESHOOTING
If you have any problems while installing the Adaptec SCSI Card
29320, check the following items first:
•
Are all SCSI devices powered on?
•
Are all SCSI cables and power cables properly connected?
•
Does each device on each SCSI bus have a unique SCSI ID?
•
Does the total SCSI cable length exceed the maximum
allowable length?
•
Is the SCSI bus properly terminated?
If you are still unable to resolve a problem, contact the system
manufacturer for help.
A
T
BOUT
ERMINATION
10
Advertisement
Table of Contents
