English
CAUTION
The emission values may deviate from the
specified values. This is dependent on how
the tool is used and the type of workpiece
being machined.
► The actual load during the entire operating
cycle must be evaluated.
► Depending on the actual load, suitable pro
tective measures must be defined in order
to protect the operator.
3
Intended use
Circular saw designed for sawing
–
wooden materials and wood-based materi
als,
–
plaster and cement compoud fibres,
–
plastic materials,
–
aluminium (only with a special saw blade
for aluminium offered by Festool)
The portable circular saw can be transformed
into a biscuit joiner using a groove unit conver
sion kit supplied by Festool.
This power tool may only be used by experts or
instructed persons.
The user is liable for improper or non-in
tended use.
3.1
Saw blades
Only use saw blades with the following dimen
sions:
–
Saw blades in accordance with EN 847-1
–
Saw blade diameter 230 mm
–
Cutting width 2.5 mm
–
Location hole 30 mm
–
Recommended blade thickness 1.8 mm,
max. 2.0 mm
–
Suitable for speeds of up to 6600 rpm
Do not use cutting or abrasive wheels.
Do not use a diamond saw blade for sawing ce
ment-bonded fibreboards.
Only saw materials for which the saw blade in
question has been designed.
4
Technical data
Circular saw
Power
Speed (no-load)
Inclination
Cutting depth at 0°
22
Circular saw
Max. cutting depth at 45°
Max. cutting depth at 60°
Saw blade dimensions
Weight (without power ca
ble)
5
[1-1]
[1-2]
[1-3]
[1-4]
[1-5]
[1-6]
[1-7]
[1-8]
[1-9]
[1-10] Split scale for the cutting depth stop
[1-11] Rotating extractor connector
[1-12] Angle scale
[1-13] Knob for angle setting
[1-14] Cutting depth adjustment
[1-15] Adjustable jaws
[1-16] Mains power cable
[1-17] Speed control
[1-18] Insulated gripping surfaces (grey
The illustrations specified are located at the be
ginning and end of the operating instructions.
6
Unauthorised voltage or frequency!
Risk of accidents
HK 85 EB
► Observe the specifications on the ma
1900 W
chine's name plate.
► Observe country-specific regulations.
3500 rpm
0 - 60°
0 - 86 mm
power cable!
Parts of the device
Handles
Safety lock
Lever for changing the tool
Retractor lever for pendulum guard
Guide wedge
Pendulum guard
Protective lid
On/off switch
Lever for plunge function
(with/without a guide rail)
shaded area)
Operation
WARNING
Always switch the machine off before
connecting or disconnecting the mains
HK 85 EB
62 mm
47 mm
230 x 2.5 x 30 mm
6.8 kg