Adaptec 29160 Installation Manual page 5

I
NSTALLING THE
Discharge any static electricity build-up before handling your
S 1
TEP
SCSI card by touching a grounded metal object (like the exposed
metal parts on the back of your computer).
W
ARNING
the power cord.
After you turn off your computer and unplug the power cord,
S 2
TEP
remove the cover from the computer.
Locate an unused 64-bit PCI expansion slot and remove the
S 3
TEP
expansion slot cover. If the computer does not have a 64-bit slot,
you can install the card in a 32-bit PCI slot. (The expansion slot
must be compliant with PCI Rev. 2.1 or higher and must support
Bus Mastering.) Save the slot cover screw for use in Step 4.
Expansion
slot cover
A
DAPTEC
Turn OFF power to the computer and disconnect
Slot cover
screw
Adaptec SCSI Card 39160
SCSI C
ARD
39160
64-bit PCI slot
32-bit PCI slot
3