Adaptec 29160 Installation Manual page 10

Installation Guide
Connecting Wide SCSI Devices
You can connect Wide SCSI devices to the internal LVD/SE con-
nectors. If you do this, we recommend that you connect them to
the SCSI Channel A LVD/SE connector and that you connect all
Ultra160 and Ultra2 devices to the SCSI Channel B connector.
Follow these steps to connect Wide SCSI devices:
Locate a 68-pin internal Wide SCSI cable.
S 1
TEP
Plug one end of the cable to the Channel A internal 68-pin con-
S 2
TEP
nector on the Adaptec SCSI Card 39160.
.
Plug the other end of the cable to a terminated Ultra/Fast Wide
S 3
TEP
SCSI device.
If you have other Ultra/Fast Wide SCSI devices, attach them to
S 4
TEP
the connectors between the two ends of the cable. Be sure these
other devices are unterminated.
Connect a power cable from your computer's internal power sup-
S 5
TEP
ply to each internal device.
8